QWOLBER 苛沃博 全氟聚醚润滑脂由纯全氟聚醚(PFPE)基础油制成，并经过最新的添加剂处理;然后用聚四氟乙烯增稠，形成剪切稳定的润滑脂。由于其优良的耐化学性、宽的温度范围、低挥发性、高承载能力、高氧化和热稳定性、无毒、优良的抗辐射性能、高体积电阻率和低倾点，它们可以用于无数的应用。

优势

耐化学

高热稳定性和氧化稳定性

高介电强度

不易燃的

宽温度范围

多用途的应用程序

使用

无论何时人们发现现有润滑脂的局限性，QWOLBER 苛沃博 全氟聚醚润滑脂将满足具有挑战性的要求。例如，在高温下不会侵蚀密封;不受冒烟的硫酸或高pH苛性钠的侵蚀;而且它们没有燃点，因此在任何情况下都是安全的。它们可以安全地用于部分或纯氧应用，并满足ASTM D2512要求。ASTM D 2512是在富氧环境中测定润滑脂相容性的公认标准。它们可以在550°F下连续使用，因此它们在高温应用中有多种用途。它们具有较低的倾点，具有优良的低温性能。它们在高温下具有非常低的挥发性，因此它们在密封终身轴承应用中非常优秀。它们具有高极压(EP)特性，因此可以用于重载齿轮和轴承，进一步提高其极压能力。

Perfluorinated Grease PFPE Grease Manufacturer

Perfluoropolyether PFPE Fluids PFPE Oils PFPE Vacuum Pump Oil

The QWOLBER greases are made from pure perfluoropolyether (PFPE) base oils and treated with state-of-the-art additives; then thickened with PTFE to form a shear-stable grease. They can be used in a myriad of applications due to their excellent chemical resistance, wide temperature range, low volatility, high load-carrying-ability, high oxidative and thermal stability, non-toxicity, excellent radiation resistance, high volume resistivity and low pour point.

Advantages

CHEMICALLY RESISTANT

HIGH THERMAL AND OXIDATIVE STABILITY

HIGH DIELECTRIC STRENGTH

NON-FLAMMABLE

WIDE TEMPERATURE RANGE

MULTI-PURPOSE APPLICATIONS

Usage

Whenever one finds limitations with their present grease, one of the QWOLBER Greases will meet the challenging requirements. For example, QWOLBER Greases do not attack seals under high temperature; they are not attacked by fuming sulfuric acid, or high pH caustic sodium hydroxide; and they have no flash point, thus they are safe under any condition. They are safe to use in partial or pure oxygen service, and meet ASTM D2512 requirements. ASTM D 2512 is the accepted standard for determining grease compatibility in oxygen rich environments. They can be used continually at 550°F, so they find a multitude of uses in high temperature applications. They have low pour points for excellent low temperature performance. They have very low volatility at high temperatures, so they are excellent in sealed-for-life bearing applications. They have high extreme pressure (EP) characteristics, so they can be used in heavily loaded gears and bearings, further enhance its extreme pressure capability.